You can for a small, simple yard, but the design and local rules are where most DIY installs go wrong. Digging trenches is the easy part. Zoning, pressure, coverage, and backflow protection are what decide whether the system works.
Updated November 2, 2026. Reviewed by [TODO: name, role].
Where DIY works
- A small lawn or one or two zones
- Drip lines for beds
- Adding a zone to a system you understand
Where people get stuck
- Design. Heads must overlap so every area gets even water. Mixing head types in one zone causes dry and soggy spots.
- Water pressure and flow. Too many heads on a zone means weak spray everywhere.
- Backflow prevention. This protects drinking water from contamination, and cities often have rules about it. [TODO: confirm local requirements before publishing anything specific.]
- Depth and freeze protection. In our climate, lines have to be installed so they can be drained or blown out for winter. See winterizing.
- Wiring and the controller. A bad splice or a wrong valve connection can take hours to track down.
How deep do lines go?
Burial depth depends on the pipe type and the freeze risk. [TODO: add a cited depth or Liberty Hill’s standard.] Whatever the depth, call 811 before you dig so buried utilities are marked.
Finding existing lines without digging
Look for valve boxes, sprinkler heads, and the controller’s zone labels, then follow the line between them. Walking the lawn while each zone runs also shows where water is going. A professional can trace lines with locating tools.
A simple decision rule
- Small yard, time to learn, existing water supply stub-out: DIY is realistic.
- Whole-yard install, slopes, or tight timeline: hire out.
- Fixing one broken part of an existing system: start with replacing a head.
Want it designed for your yard?
Sprinkler systems are often installed alongside lawns and landscaping. Our landscape installation team can include irrigation in a project. [TODO: confirm and link a dedicated sprinkler install page if one exists.] Call 385-424-8743.