There is no single number, because every system puts out a different amount of water. Measure yours, then water deeply and less often. Twenty minutes can be too little for one zone and too much for another. [TODO: add the weekly water target from a cited Utah source.]
Updated November 2, 2026. Reviewed by [TODO: name, role].
The can test
- Set several flat-bottomed containers (tuna cans work) across one zone.
- Run the zone for 15 minutes.
- Measure the water in each can with a ruler.
- Average the results, then scale up. If you collect a quarter inch in 15 minutes, you need an hour for one inch.
Do this once per zone. Spray heads and rotor heads put out water at very different rates, so zones on the same system rarely match.
Why deeper and less often
Frequent short cycles wet only the surface and keep roots shallow. Fewer, longer cycles push water down so roots follow it. Shallow roots leave a lawn with less to draw on when summer heat arrives.
Adjust for conditions
- Spring and fall: cut back as temperatures drop.
- Summer heat: you will water more, but check the soil before adding time.
- Slopes and clay soil: water may run off before it soaks in. Split the time into two shorter cycles with a break between.
- Shade: needs less than full sun.
Signs the schedule is wrong
- Too little: footprints stay in the grass, blades curl, and the lawn turns blue-gray.
- Too much: puddles, mushrooms, and a spongy feel.
- Uneven: brown and green patches in the same zone usually point to a broken or misaligned head, not the timer. See replacing a broken head.
Need it checked?
If you have dry spots no matter how long you run the system, our sprinkler repair team in Weber and Davis counties can find the cause. Call 385-424-8743.