Shut off the water to the zone, dig around the head, unscrew it, and screw on a matching replacement. It is one of the easier sprinkler repairs, and most homeowners can do it with a trowel and a new head. [TODO: confirm time estimate with Liberty Hill’s field experience.]
Updated November 2, 2026. Reviewed by [TODO: name, role].
What you need
- A replacement head that matches the old one (pop-up height, spray pattern, and brand if possible)
- A trowel or small shovel
- Thread tape (plumber’s tape)
- A bucket or rag for dirt and water
Bring the broken head to the store to match it. Mixing head types in one zone causes uneven watering.
Steps
- Turn off the zone. Shut off the water to the system or the zone you are fixing.
- Dig around the head. Cut a small circle of sod and set it aside. Dig by hand so you do not nick the pipe underneath.
- Unscrew the old head. Turn it counterclockwise off the riser. If the riser is cracked, replace it too.
- Flush the line. Briefly turn the water on to push out dirt, then turn it off. Debris in the line will clog the new head.
- Install the new head. Wrap thread tape on the threads, screw on the new head by hand, and do not overtighten.
- Test and adjust. Turn the water on, check the spray pattern and distance, and adjust the arc so it does not hit the house or sidewalk.
- Backfill. Pack soil around the head so it sits level with the ground and put the sod back.
When to call someone instead
- Water keeps pooling after you replace the head. You may have a cracked line.
- The head keeps breaking. Something may be hitting it, or pressure may be too high.
- Several heads in one zone are failing or the zone will not run.
- You need to dig deeper than a few inches. Call 811 before any deep digging.
Want a pro to look at it?
Our sprinkler repair team in Weber and Davis counties can fix a head or find the real cause. See what repairs cost, or call 385-424-8743.