Not always. Low-voltage landscape lighting is designed to be installed by homeowners and landscapers, but any work on your home’s 120-volt power usually calls for a licensed electrician. The dividing line is where the power comes from. [TODO: confirm local rules before this page is published.]
Updated November 2, 2026. Reviewed by [TODO: name, role].
The two parts of a system
- The power source. A transformer steps household power down to a safer low voltage. It plugs into an outdoor outlet or is wired to your home’s power.
- The low-voltage side. Cable runs from the transformer to each fixture. This side is the part most landscapers install.
Where an electrician comes in
- You do not have a working outdoor outlet near where the transformer should go.
- The transformer needs to be hard-wired to the house.
- Your existing outlet is not protected the way outdoor outlets should be.
- You are adding a large system with a lot of fixtures on one circuit.
If you are unsure what your outlet or panel can handle, treat that as the sign to bring someone in.
What DIY installation looks like
Lay out fixtures at night with a flashlight before you dig. Run cable, make connections with waterproof connectors, bury the cable at a shallow depth in beds, and test before backfilling. Mistakes are usually in layout and connections, not in the digging.
A simple decision rule
- Plug-in transformer, outlet already in place: a careful DIYer can handle it.
- No outlet or hard-wired transformer: hire an electrician for that piece.
- Large or complex yard: hire a company that designs and installs the whole thing.
Want it done for you?
[TODO: Liberty Hill to confirm how it handles power supply work.] Our landscape lighting installation team can plan the layout and the power in one visit. Call 385-424-8743. See what it costs.